Chapter 5: Heats and mains

Print heat sheets

Print the heat lineups, schedule and agenda for the pit board with Print or Ctrl+P on Heats & Program. Mains print with start spots and bump-up slots.

For race directors about 1 min 3 steps
VideoComing soon. The written guide below has every step.

We are recording this one now. It will play right here when it is ready.

Drivers want to know when they race. Print puts the heat lineups and the running order on paper for the pit board.

Before you start

  • Heats generated.

Step by step

  1. 1

    Open Heats & Program

    The heat cards show tonight's program.

  2. 2

    Click Print

    Choose lineup, schedule or agenda sheets.

  3. 3

    Send to the printer

    Use landscape for large heats.

Tips

  • Ctrl+P on Heats & Program prints the heat sheets.
  • Mains print with each driver's start spot and the bump-up slots.
  • Print again after re-seeding: the program changes between rounds.

Troubleshooting

The printout is missing the latest round.
Print after you generate the next round.

Related guides

Something here does not match what you see? Tell us and we will fix the guide.

Up next Build the mains about 1 min